Simply plug the Key Logger device into the port used for the keyboard and then plug the keyboard connector into the key logging device. No software or drivers are required. The Key logger will automatically start redording all data typed on the keyboard to the internal flash disk.
Once data has been captured in record mode, you can retrieve it on any computer with a USB port. If retrieving data on the computer that the device is in use on then simply leave the device in situ (as in record mode). Data retrieval is done by switching to Flash Drive Mode.
Each device has a default 3 Key combination (K, B, S) - this should be changed to your preferred combination to avoid others using the default code. Press your 3 Key combination (simultaneously) to load in Flash Drive Mode. The Key Logger will automatically respond as a mass storage device.
The Flash Drive will contain the file LOG.TXT with a text log of all captured data. Keystroke data is formatted in the same as it would appear on the screen, with special keys in brackets ([Ent], [Esc], [Del] etc.). This file can be viewed and searched with any text editor, such as Notepad or MS Word.
The hardware keylogger may be configured through the file CONFIG.TXT, placed in the Flash Drive root folder. Use any text editor to prepare such a configuration file, containing the following text:
Copy this file to the root folder in Flash Drive mode. The configuration will be loaded on next record mode initialization.
Password sets the 3-key combination for triggering Flash Drive mode. Any three-letter key combination is allowed (sequence is irrelevant). Default value is KBS.
LogSpecialKeys sets the logging level for special keys, such as Enter, Escape, F1...F12 etc. Special keys are logged in brackets, i.e. [Ent]. Allowed values are None (only text is logged), Medium (text with basic function keys are logged), and Full (text with all special keys are logged). Default value is Medium.
DisableLogging allows to disable logging, however does not affect mode switching. Allowed values are Yes (logging disabled) and No (logging enabled). Default value is No.
Please Note: Neither the Manufacturer nor the Seller takes responsibility for any damage, harm or legal actions caused by the misuse of KeeLog products. It is the user's responsibility to obey all effective laws in his/her country, which may or may not prohibit the use of KeeLog products.